1 Comments
Find More Information or Find Seller
Download Sansui AU-D9 Service Manual
You must be logged in to download manuals.
All information provided is free to use, the rights to photos, information and manuals belong to the manufacturers!
Specifications
Sansui AU-D9
Specifications
Power output: 95 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 20kHz
Total harmonic distortion: 0.005%
Damping factor: 150
Input sensitivity: 0.1mV (MC), 2.5mV (MM), 250mV (line)
Signal to noise ratio: 74dB (MC), 90dB (MM), 110dB (line)
Channel separation: 80dB (MM), 50dB (MC), 80dB (line)
Output: 250mV (line)
Speaker load impedance: 8Ω (minimum)
Dimensions: 445 x 163 x 403mm
Weight: 13.7kg
Latest in Integrated Amplifiers
Sansui AU-607 DC power amplifier part which adopted the newly developed Dual FET, the peculiar curre..
Sansui AU-11000A Specifications Power output: 110 watts per channel into 8Ω (stereo) Frequency res..
Sansui AU-X417R The Sansui made a good impression from the first few bars, and built on it as the va..
Sansui AU-D33 Specifications Power output: 50 watts per channel into 8Ω (stereo) Frequency respons..
1 Comment
Love the sound of it, this amplifier is perfect for my (properly all ) turntables, a torrens td 290 modified with a Sme series III tonearm and a low budget Audio-Technica AT-VM95C .
However, it should be mentioned when I got it home, I sent it down to a radio technician to have it reviewed and cleaned.
He knew it very well, as he had changed servel of capacitors on this model during his apprenticeship.
He was amazed that they had been replaced in my amplifier with some that were significantly better and more expensive, which he thought had probably cost almost the same as the whole amplifier from new.
This modification probably means that my primitive review can probably not be completely used on a standard edition.
Registration