The stereo player system which eliminated a cost restraint and technical compromise, poured in all the technical know-hows, and was finished by an one-set one-set handmade in order to pull out the sound of the disk of one sheet to a limit closely, and also to remove an oscillation as much as possible and to realize a high fidelity play.
The scheme which controls DD motor of the linear torque scheme of a slotless and a coreless structure by Quartz PLL is adopted as a phone motor and a bearing structure. Furthermore, by the conventional measuring method, the impossible rotation performance of 0.001% of less than rotation unevenness 0.003% and a rotational frequency precision is realized by adopting the bearing structure of a SHR (Stable hanging rotor) scheme where the centroid of the axis-of-revolution part was set up low.
A SHR scheme is what designed the bearing structure to the inverted structure of the conventional scheme, an inertia arises in a bearing part during a rotation, and side pressure has stopped applying to an axis probably by having brought the supporting point close to a centroid and having changed the conventional bearing part into the rotation side as for it. And for the preventing with ガタ, the path clearance of bearing occurs for a minimum and the inertia of a turntable is set to sufficient torque also to the load intensity of the cartridge added to the perimeter of a turntable.
The high torque motor of the dual rotor structure using an anisotropy ferrite magnet with a strong attraction of magnet has realized about the same high torque (10 kg-cm) as a record cutting unit.
Furthermore, adoption and the interval of the servo circuitry which was excellent in the turntable of inertial-mass 700 kg-cm2 or the transient realized the outstanding startup property (it is a constant-speed rotation in 0.3 second after switchpoint-on) and load characteristics-proof (it is 1.5kg by stylus-force conversion), and have acquired the rotation property that the stable precision is high.
In addition to the weight saving of a tone arm, the mass concentration scheme and oil dumping adjustment mechanism which concentrated the mass on the axis of revolution are carried in the tone arm part.
By adding braking by reliable silicon oil on an arm axis, the reduction of massive [ low-pass ] and cross modulation distortion is realized. Moreover, it is also possible to be able to control the amount of braking of oil dumping according to the property of a cartridge, and to turn OFF dumping.
In order that a tone arm part may make a mechanical impedance make it flat, it repeated the analysis and audition of the oscillation mode of all fractions, and performed them, and the product made from carbon fiber integrated arm pipe of head shell one is used for it.
Since a using of a commercial head shell is enabled, a switching of a straight pipe and S character type universal arm pipe is possible.
The quick stop organization which used together the motor, the electronic formula brake which applies the power of a reverse rotation, and the mechanical brake which stops a rotation of a rotor using a plunger by work of an electronic circuitry is carried.
The motor part and the tone arm part are fixed to the base with a weight of 12kg which laminated the barium sulfate of aluminum and high-density material.
Furthermore, the base was completely floated from the cabinet and the vibration proof structure of the coaxial suspension scheme which intercepts the oscillation from the sound pressure and the floor from a speaker is adopted.
In order to make a high howling margin possible, the insulator of the Mie structure is adopted.
Special rubber is used, in order to support a 25kg main unit with the oil dumping type waveguide-plunger structure using a 62mm spring and also to make the surging of a spring absorb.
Moreover, since the resonant frequency of the insulator is set as 5Hz or less lower than the resonant frequency of a tone arm, the howling margin with high vibration proof structure and interval of a coaxial suspension has been obtained.
It is the design which combined the cabinet of native wood eye finish of the Brazi LeAnn Lowe’s wood, and the book jacket excellent in the prevention from a howling made from tempered glass with the cabinet.
For the reason in the case of equipping the same arm as P3a, there was a tone arm as an option.
Registration